VacuMaster 250/8-store

Handling of parts at above head height has always been a problem. Now, with our new handle concept for the VacuMaster VMV 250/8-Store, we present an easy solution for handling loads at heights of up to 3 metres. A typical application for this is the removal of metal sheets from a rack. The handle is decisive for the ergonomical handling of the device. For removal of large metal sheets from the rack, the handle is fully extended and, as the load is raised, tilted downwards with the aid of the latching joint. For handling loads at lower heights, the handle is locked in the horizontal position and its length is adjusted to about half the width of the load. The basic version is suitable for loads of up to 250 kg and equipped with suction pads for sheet metal with a thickness of at least 0.5 mm,

Reference No. 12.02.07.00618