 |
|
Up-to-date information about vacuum technology.
|
|
|
|
| 
|
|
|
28/Aug/2007
Pressure switch with teach function
New pressure switches whose switching point can be set by pressing a button!
|
Small but good - the powerful and robust miniature vacuum switch has many clever and practical features..
Utilise these advantages:
Push-button setting
The two switching points can be set in seconds by simply pressing the "Teach" button. This can be done while the process is running.
The teach button is recessed in the housing to prevent inadvertent actuation!
Super-precise measurement
The electronic pressure sensor operates with excellent switching precision and repeatability.
|
|
|
|
Push-button setting
The two switching points can be set easily with the teach button, even when the process is running!
|
|
|
Minimum size
The slim design with a width of only 10 mm permits installation anywhere without problems. With on 6g weight the mass of the switch is virtually negligible.
Two digital switching outputs
No additional switching components are needed.
Flexible mounting facilities
The small pressure switch requires little space and can be mounted vertically or horizontally. An adapter plate permits rapid mounting!
The pressure to be measured can also be connected in various ways: with an M5 thread, a plug-in tube (6mm) or via the adapter plate.
|
|
|
|
Slim design
With a width of only 10 mm, the vacuum switch can be installed anywhere without problems!
|
|
|
Small but powerful
The small switch is a powerful switching device, capable of switching currents of up to 200 mA. This means that direct control of other components is possible.
Small and strong!
Further important details:
- Pressure range 0 to 10 bar
- Resists overpressures of up to 15 bar
- Wide range of variants - the modular system permits optimal matching to any desired application
- Operating temperature range 0 to 60 °C
- Protection IP 40
- Electrical connection by male connection M8, 4-pole
|
|
|
|
|
|
Application areas:
- Electronic safety monitoring, optimisation of cycle times, energy-saving systems
- Suitable for use as a measuring device and a switch
- Ideal for use in handling systems with very dynamic movements
Target sectors:
- CD industry
- Plastics processing
- Metal and sheet-metal industry
- Packing industry
- Electronics industry
- Automation
Are you interested in our new vacuum switch?
If so, send us an email or call us on +49(0)7443 / 2403 - 281, where Rolf Zahn will gladly answer your questions!
|
|
|
|
|
|
|
|
|
Your contact for all inquiries:
|
|
 |
|
|
|
|
|
J. Schmalz GmbH
Kerstin Löffler
Marketing
Aacher Straße 29
D-72293 Glatten
|
|
Phone: +49(0)7443 / 2403-323
Fax: +49(0)7443 / 2403-623
eMail: kerstinloeffler@schmalz.de
|
|
|
Direct order 
VacuNews
)
)
)